7.3L Godzilla Crate Engine 700HP

Estimated Price $20,595.00

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Our complete 7.3L Ford Godzilla 700HP crate engine package dyno tested ready for installation. This build features the Ported cylinder heads, Forged pistons, H-beam connecting rod, BTR trinity or Edelbrock intake. Comes ready to install into your Ford Resto Mod Project. We can also assist you in picking out the correct motor mount and header combo that will fit your hot rod build. If you are in need of a serpentine pulley kit complete with components or a transmission we can assist you with that as well.

  • Fully Machined Ford 7.3L Cast Iron 6 Bolt Main Block
  • Ford 7.3L forged crankshaft
  • H-Beam connecting rods (Callies of K1)
  • Custom Forged Performance Pistons
  • Complete Assembly Internally Balanced
  • Custom Ground Hydraulic Roller Camshaft
  • Hydraulic Roller Lifters
  • Timing chain set
  • Zero Degree Timing Lock Out
  • Oil pump
  • Ford 7.3L Godzilla Cylinder Heads
  • 2.170 8mm Intake Valve
  • 1.67 8mm Exhaust Valve
  • Beehive Valve Springs (PAC)
  • Valve Retainers And Locks
  • Head Gaskets
  • Head Bolts
  • Ford Rocker Arms
  • Chrome Moly Pushrods
  • Aluminum Timing And Rear Cover
  • OEM Style 8 Quart Aluminum Oil Pan
  • Valve Covers (Indy Power Products Billet Lower)
  • Harmonic Balancer (ATI or Innovators West)
  • Holley Terminator X ECU
  • Performance Intake manifold (BTR, or Edelbrock)
  • Holley Fuel Rail Kit
  • 102mm DBC Throttle Body (Black)
  • Throttle Position Sensor
  • Idle Air Control Valve
  • Fuel Injectors
  • Intake Air Temperature Sensor
  • Crankshaft Position Sensor
  • Camshaft Position Sensor
  • Engine Coolant Temperature Sensor
  • Wide Ban O2 Sensor
  • Main ECM Engine Wiring Harness
  • ECM Power Harness
  • Coil Pack Harness
  • Fuel Injector Harness
  • Misc Harness Extensions (Clean Install)
  • Coil Packs
  • Spark plugs
  • MSD 8.5MM Plug Wires
  • Oil And Filter
  • Water Pump
  • Engine will be Dyno tested and tuned for optimum performance
  • 2 Year Unlimited Miles Warranty

CVF Logo

Pulley Systems

Alternator Only

Alternator Only

This system includes the following items:

  • Chrome 140 Amp Alternator
  • Polished Alternator Pulley
  • Polished Crankshaft Pulley
  • Polished Water Pump Pulley
  • Polished Aluminum Brackets With Fan & Nose Cover
  • 8 Rib Serpentine Belt
  • Installed On Your Engine

Add $975

Alternator & Power Steering

Alternator & Power Steering

This system includes the following items:

  • Chrome 140 Amp Alternator
  • GM Type 2 Power Steering Pump With Reservoir
  • Polished Alternator Pulley
  • Polished Crankshaft Pulley
  • Polished Water Pump Pulley
  • Polished Aluminum Brackets With Fan & Nose Cover
  • Polished Idler Pulley
  • Spring Loaded Belt Tensioner
  • 8 Rib Serpentine Belt
  • Installed On Your Engine

Add $1,875

Alternator, Power Steering &  Air Conditioning

Alternator, Power Steering & Air Conditioning

This system includes the following items:

  • Chrome Plated 140 Amp Alternator
  • GM Type 2 Power Steering Pump With Reservoir
  • Chrome Plated AC Compressor
  • Polished Alternator Pulley
  • Polished Crankshaft Pulley
  • Polished Water Pump Pulley
  • Polished Aluminum Brackets With Fan & Nose Cover
  • Spring Loaded Belt Tensioner
  • 8 Rib Serpentine Belt
  • Installed On Your Engine

Add $2,300


Dress Up

Indy

Indy "Powered By Ford" Valve Covers

This assembly includes the Indy "Powered by Ford" Power Products billet coil covers and valve covers, in one kit, to fit the Ford 7.3L Godzilla crate engine.

This system includes the following items:

  • Billet aluminum valve covers (2), hardcoat anodized black
  • Oil Caps (2), billet -12 O-Ring sealing
  • PCV Assembly, billet, -12 O-Ring sealing, works with OE PCV line
  • Vent Fitting, billet, -12 O-Ring sealing, works with OE vent line
  • Ford original equipment gaskets
  • Billet aluminum coil covers (2), hardcoat anodized black and fly cut
  • All required mounting hardware

Add $1,680

Indy 7.3L Godzilla Valve Covers

Indy 7.3L Godzilla Valve Covers

This assembly includes the Indy Power Products billet coil covers and valve covers, in one kit, to fit the Ford 7.3L Godzilla crate engine.

This system includes the following items:

  • Billet aluminum valve covers (2), hardcoat anodized black
  • Oil Caps (2), billet -12 O-Ring sealing
  • PCV Assembly, billet, -12 O-Ring sealing, works with OE PCV line
  • Vent Fitting, billet, -12 O-Ring sealing, works with OE vent line
  • Ford original equipment gaskets
  • Billet aluminum coil covers (2), hardcoat anodized black and fly cut
  • All required mounting hardware

Add $1,680


Does this engine look like a good fit?