Custom Built Turn Key
Muscle Car Hot Rod Engines
We Ship Worldwide!
7.3L Godzilla Crate Engine 625HP
Estimated Price $17,695.00
*Shown with optional upgrades
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Our complete 7.3L Ford Godzilla 625HP crate engine package dyno tested ready for installation. This build features the 6 bolt main block, Holley electronics, BTR or Edelbrock intake manifold, and much more. Comes ready to install into your Ford Resto Mod Project. We can also assist you in picking out the correct motor mount and header combo that will fit your hot rod build. If you are in need of a serpentine pulley kit complete with components or a transmission we can assist you with that as well.
7.3L Godzilla Crate Engine 625HP
- Fully Machined Ford 7.3L Cast Iron 6 Bolt Main Block
- Block Painted With High Temp Ceramic Engine Paint
- Ford 7.3L forged crankshaft
- I-Beam connecting rods
- Pistons
- Complete Assembly Internally Balanced
- Custom Ground Hydraulic Roller Camshaft (Muscle Car Chop)
- Hydraulic Roller Lifters
- Timing chain set
- Zero Degree Timing Lock Out
- Oil pump
- Ford 7.3L Godzilla Cylinder Heads
- 2.170 8mm Intake Valve
- 1.67 8mm Exhaust Valve
- Beehive Valve Springs (PAC)
- Valve Retainers And Locks
- Ford Rocker Arms
- Chrome Moly Pushrods
- Head Bolts
- Aluminum Timing And Rear Cover
- OEM Style 8 Quart Aluminum Oil Pan
- Valve Covers (Indy Billet Lower Half)
- Harmonic Balancer
- Holley Terminator X ECU
- Performance Intake manifold (BTR, or Edelbrock)
- Holley Fuel Rail Kit
- 102mm DBC Throttle Body (Black)
- Throttle Position Sensor
- Idle Air Control Valve
- Fuel Injectors
- Intake Air Temperature Sensor
- Crankshaft Position Sensor
- Camshaft Position Sensor
- Engine Coolant Temperature Sensor
- Wide Ban O2 Sensor
- Main ECM Engine Wiring Harness
- ECM Power Harness
- Coil Pack Harness
- Fuel Injector Harness
- Misc Harness Extensions (Clean Install)
- Coil Packs
- Spark plugs
- MSD 8.5MM Plug Wires
- Oil And Filter
- Water Pump
- Engine will be Dyno tested and tuned for optimum performance
- 2 Year Unlimited Miles Warranty
Pulley Systems
Alternator Only
This system includes the following items:
- Chrome 140 Amp Alternator
- Polished Alternator Pulley
- Polished Crankshaft Pulley
- Polished Water Pump Pulley
- Polished Aluminum Brackets With Fan & Nose Cover
- 8 Rib Serpentine Belt
- Installed On Your Engine
Add $975
Alternator & Power Steering
This system includes the following items:
- Chrome 140 Amp Alternator
- GM Type 2 Power Steering Pump With Reservoir
- Polished Alternator Pulley
- Polished Crankshaft Pulley
- Polished Water Pump Pulley
- Polished Aluminum Brackets With Fan & Nose Cover
- Polished Idler Pulley
- Spring Loaded Belt Tensioner
- 8 Rib Serpentine Belt
- Installed On Your Engine
Add $1,875
Alternator, Power Steering & Air Conditioning
This system includes the following items:
- Chrome Plated 140 Amp Alternator
- GM Type 2 Power Steering Pump With Reservoir
- Chrome Plated AC Compressor
- Polished Alternator Pulley
- Polished Crankshaft Pulley
- Polished Water Pump Pulley
- Polished Aluminum Brackets With Fan & Nose Cover
- Spring Loaded Belt Tensioner
- 8 Rib Serpentine Belt
- Installed On Your Engine
Add $2,300
Dress Up
Indy "Powered By Ford" Valve Covers
This assembly includes the Indy "Powered by Ford" Power Products billet coil covers and valve covers, in one kit, to fit the Ford 7.3L Godzilla crate engine.
This system includes the following items:
- Billet aluminum valve covers (2), hardcoat anodized black
- Oil Caps (2), billet -12 O-Ring sealing
- PCV Assembly, billet, -12 O-Ring sealing, works with OE PCV line
- Vent Fitting, billet, -12 O-Ring sealing, works with OE vent line
- Ford original equipment gaskets
- Billet aluminum coil covers (2), hardcoat anodized black and fly cut
- All required mounting hardware
Add $1,680
Indy 7.3L Godzilla Valve Covers
This assembly includes the Indy Power Products billet coil covers and valve covers, in one kit, to fit the Ford 7.3L Godzilla crate engine.
This system includes the following items:
- Billet aluminum valve covers (2), hardcoat anodized black
- Oil Caps (2), billet -12 O-Ring sealing
- PCV Assembly, billet, -12 O-Ring sealing, works with OE PCV line
- Vent Fitting, billet, -12 O-Ring sealing, works with OE vent line
- Ford original equipment gaskets
- Billet aluminum coil covers (2), hardcoat anodized black and fly cut
- All required mounting hardware
Add $1,680
Does this engine look like a good fit?