383 Chevy Stroker Crate Engine With 450 HP

Starting at $6,095

Our 383 with 450 HP stroker engine has a 3.750 stroke which delivers an extremely high amount of torque, you have to experience one to know how it feels. This engine package delivers a lot of punch for your money. This is what most of our customers prefer when building there strip/street car. Engine can be custom painted to match your vehicle at your request. We can also equip your engine with the exclusive March Performance serpentine belt system. We can also assist you in choosing the proper transmission and stall speed converter combination for your vehicle and have it shipped directly to you as your performance crate engine is being built.

  • Fully machined seasoned factory roller 4 bolt main block
  • Block painted with 3 coats of high temp ceramic engine paint
  • Eagle steel crankshaft 3.750 stroke
  • Eagle I-Beam connecting rods with ARP bolts and bushed pins
  • Forged high performance pistons (SRP, Icon, or Mahle)
  • Performance rods and main bearing (Clevite, King or Federal Mogul)
  • Performance rings hand filed to match application
  • ARP main bolts
  • The complete rotating assembly is balanced
  • Custom ground hydraulic roller camshaft
  • Hydraulic roller lifters
  • Three piece double roller timing set
  • Performance aluminum cylinder heads (Edelbrock)
  • 7/16 Screw in studs and hardened guide plates
  • Chrome moly push rods
  • Performance roller rockers (SSR Series)
  • Melling high volume oil pump and screen
  • Chrome oil pan
  • Chrome timing cover
  • Fel-Pro gaskets
  • Performance aluminum intake manifold (Edelbrock)
  • New performance balancer
  • Your engine build will be photo documented during the building process so you can see the quality of parts and workmanship that goes into your engine
  • Additional Items Included:
  • Metal Engine Stand
  • Flex Plate (Auto Trans)
  • 1 Year Crate Engine Warranty

Make It A Turn Key Engine

Ready To Run Out Of The Box

Ready To Run Out Of The Box

This system includes the following items:

  • Holley Ultra HP carburetor w/ electric choke
  • MSD pro-billet performance distributor
  • MSD Blaster II coil
  • MSD chrome coil bracket
  • Taylor 8mm ignition wires (color of choice)
  • Taylor 8mm Vertical Wire Loom Kit
  • Spark plugs
  • Water pump
  • Chrome dipstick and tube
  • Chrome thermostat housing
  • Thermostat
  • Chrome air cleaner
  • Chrome breathers
  • Chrome Distributor Hold Down Clamp
  • 6 Quarts 20W-50 Conventional Oil
  • Oil filter
  • Your engine will be tested and tuned for optimum performance
  • TURN-KEY OPTION 1 YEAR UNLIMITED MILEAGE WARRANTY!

Add $1,550


Dyno Testing

Have your new crate engine Dyno tested!

Have your new crate engine Dyno tested!

Proformance Unlimited measures over 30 parameters that are monitored and logged to the computer during each engine test. A complete printout, including graphs.

We tune your engine on the dyno for maximum power. No more endless trial and error methods at the track are required. You see your results instantly! Dynamometer testing costs a fraction of what you have invested. Take the guesswork out of tuning - by dynoing !

This system includes the following items:

  • Your engine will be broken in under various load conditions
  • Tested in real world conditions through headers and mufflers
  • Precise horsepower and torque rating with graph and numerical print out
  • Induction system tuned for optimal performance
  • Dyno session video taped
  • 2 YEAR UNLIMITED MILEAGE WARRANTY!

Add $950


March Performance Pulleys

Pulley Systems

Alternator Only

Alternator Only

This system includes the following items:

  • Chrome 105 Amp alternator
  • Alternator pulley
  • Crankshaft pulley
  • Water pump pulley
  • Aluminum bracket with fan & nose cover
  • Belt tensioning bar
  • Serpentine belt
  • Installed on your engine

Add $750

Alternator & Power Steering

Alternator & Power Steering

This system includes the following items:

  • March Performance Style Tracks Kit:
  • 105 Amp alternator chrome
  • Chrome power Steering Pump
  • Alternator pulley
  • Crankshaft pulley
  • Water pump pulley
  • Power steering pump pulley
  • Aluminum bracket with fan & nose cover
  • Belt tensioning bar
  • Serpentine belt
  • Installed on your engine

Add $1,675

Alternator, Power Steering &  Air Conditioning

Alternator, Power Steering & Air Conditioning

This system includes the following items:

  • March Performance Style Tracks Kit:
  • Chrome 105 Amp alternator
  • Power Steering Pump
  • Chrome AC Pump
  • Alternator pulley
  • Crankshaft pulley
  • Water pump pulley
  • Power steering pump pulley
  • AC pump nose cover
  • Aluminum bracket with fan & nose cover
  • Belt tensioning bar
  • Serpentine belt
  • Installed on your engine

Add $2,100

Corvette Alt, PS, and AC

Corvette Alt, PS, and AC

This system includes the following items:

  • March Performance Style Tracks Kit:
  • Chrome 105 Amp alternator
  • Power Steering Pump
  • Chrome AC Pump
  • Alternator pulley
  • Crankshaft pulley
  • Water pump pulley
  • Power steering pump pulley
  • AC pump nose cover
  • Aluminum bracket with fan & nose cover
  • Belt tensioning bar
  • Serpentine belt
  • Installed on your engine

Add $2,250


Fuel Delivery Systems

FiTech Fuel Injection

FiTech Fuel Injection

This system includes the following items:

  • Die Cast Throttle body
  • Handheld Controller
  • (4) Hi-Flow 600 HP injectors
  • Built-in pressure regulator
  • 2.5 BAR Internal MAP Sensor
  • Throttle Position Sensor
  • Idle Air Control
  • Coolant Temp Sensor
  • Wide band O2 Sensor
  • O2 Bung Kit
  • -06AN Fuel Inlet Fitting
  • Gasket Kit

Add $795

 Atomic EFI by MSD

Atomic EFI by MSD

This system includes the following items:

  • Throttle Body Assembly (An exact swap for a 4150 Holley)
  • (4) port style injectors
  • EMS (Engine Management System)
  • Comprehensive Instruction Manual
  • All harnesses and connectors (Much less harnessing than other systems)
  • Idle Air Control - Built in to the throttle body
  • Coolant Temperature Sensor - 3/8-NPT threads for most manifolds
  • Throttle Position Sensor
  • Wideband O2 Sensor and cable (Many competitive units are narrowband)

Add $2,450


Parts

MSD Starter

MSD Starter

This system includes the following items:

  • Dyna Force Starter
  • Small Block Chevy
  • Big Block Chevy
  • High Torque
  • 153 and 168 Tooth
  • Straight Bolt Pattern

Add $300

MSD 6AL Series Ignition Box

MSD 6AL Series Ignition Box

This system includes the following items:

  • Higher output with 530 primary volts and 135mJ of spark energy
  • Efficient components use less current to produce more power
  • Set an rpm limit on the 6AL with two rotary dials in 100 RPM increments
  • Same bolt pattern as the original 6AL with a lower profile housing
  • Built-in LED for system checks
  • All wires exit the same side through a locked, sealed connector

Add $275

Flywheel - Chevy

Flywheel - Chevy

This system includes the following items:

  • 153 or 168 tooth

Add $375


Dress Up

Custom Painted Engine

Custom Painted Engine

Have a custom painted car? Why not have a custom painted engine? Give us your paint code and we'll do the rest.

This system includes the following items:

  • Custom paint

Add $350

GM Performance Black Crinkle Kit

GM Performance Black Crinkle Kit

Engine Dress-Up Kit, High-Tech Collector's Series, Valve/Timing Covers, Air Cleaner, Breather, Black Crinkle

This system includes the following items:

  • Dress Up Code 758
  • Valve Covers - Tall Design
  • Wing Nuts and Valve Cover Hold-Down Clamps
  • Air Cleaner (14'' dia.) with Bow-Tie Center Nut
  • Timing Chain Cover
  • Breather Cap

Add $225

Chevy Small Block Engine Dress Up Kit Orange

Chevy Small Block Engine Dress Up Kit Orange

Dress Up Kit, Tall Valve Covers, Drop Base Air Cleaner, Accessories, Orange Powdercoated, Chevy, Small Block

This system includes the following items:

  • Dress Up Code 780
  • Tall Valve Covers
  • Valve Cover Mini Nuts and Valve Cover Hold-Down Clamps
  • 14'' Air Cleaner with Bow-Tie Center Nut
  • 14'' Air Cleaner with Bow-Tie Center Nut
  • Breather Cap

Add $245

GM Performance Chrome Dress-up Kit w/Bowtie

GM Performance Chrome Dress-up Kit w/Bowtie

Engine Dress-Up Kit, Chrome, Tall Valve Covers/Air Cleaner/Timing Cover/Breather, Chevy, Small Block

This system includes the following items:

  • Dress Up Code 900
  • Tall Valve Covers
  • Air Cleaner (14'' dia.) with Bow-Tie Center Nut
  • Timing Chain Cover
  • Breather Cap
  • Valve Cover Wing Nuts
  • Valve Cover Hold Downs

Add $225

GM Performance Die-Cast Slant Edge Chrome Valve Cover Kit

GM Performance Die-Cast Slant Edge Chrome Valve Cover Kit

Valve Covers, Cast Aluminum, Chrome, Slant-Edge, Chevrolet, Bowtie Emblem, Chevy, Small Block, Pair

This system includes the following items:

  • Dress Up Code 930
  • Chrome Chevrolet/Bow Tie Recessed Logo
  • 14'' Air Cleaner with Bow-Tie Center Nut
  • Breather Cap
  • Timing Chain Cover

Add $425


Transmission

Automatic Transmission Package TH-350 or TH-400

Automatic Transmission Package TH-350 or TH-400

This system includes the following items:

  • 3 Speed Auto Transmission
  • Shift Kit
  • Improved Valve Body
  • Adjustable Servo
  • Stall Speed Converter To Match Application

Add $1,900

Tremec TKO600 5 Speed Manual Transmission Package *

Tremec TKO600 5 Speed Manual Transmission Package *

This system includes the following items:

  • New TKO600 Ford Street and Strip, 26-spline input shaft, full factory warranty
  • Gear Ratios: 2.87, 1.89, 1.28, 1:1, .64
  • Main Case Streamlining - Modified to fit your tunnel
  • AP Revolution Shifter Mechanism - Original 4-speed shift position
  • Driveshaft Slip Yoke - Cryogenically hardened steel
  • X-Factor Cross Member - Modular T6061 Aluminum, bolt-in
  • Transmission Mount - Polyurethane
  • Pilot Bearing - Stainless rollers, grease pre-pak
  • Reverse Light Harness
  • Speedometer Conversion
  • Shifter Knob
  • Hardware
  • Instructions
  • QT SFI Bell Housing for Ford 289/302/5.0/351 C/W to TKO/T5
  • SCIENCE FRICTION Billet Steel 157t Flywheel
  • FLYWHEEL BOLT, SET OF 6, Race Grade 8
  • SBF 8mm PP Bolt Set
  • SCIENCE FRICTION STAGE2 SUPER STREET CLUTCH KIT
  • HIGH CLAMP LOAD 10.5" LOW FLEX FORMED PRESSURE PLATE
  • FULL FACE WOVEN KEVLAR SPRUNG HUB DISC
  • ALL STEEL RELEASE BEARING
  • STAINLESS PILOT BEARING
  • LIGHT PEDAL EFFORT
  • FORD HYDRAMAX Hydraulic Clutch Actuator System Kit Includes:
  • Concentric Slave Bearing - Dual line, double width seals
  • Steel Braided Lines - Teflon Lined Stainless Steel
  • 3/4" Bore Master Cylinder - Black Powder Coated
  • Hydramax Firewall Mount - Patented Adjustable Mount w/Firewall Stiffener
  • Reservoir Kit - Remote or local mount, plastic (billet upgrade available)
  • Pedal Rod and Hardware - Model Specific, Adjustable Length
  • Fittings, hardware and complete instructions.

Add $4,800-$6,500


Does this engine look like a good fit?